To connect an HP printer to Wi-Fi, follow these general steps. To know more about how to connect hp printer to wifi. Keep in mind that specific instructions might vary depending on the model of your HP printer:

1. Prepare the printer: Make sure your HP printer is turned on and properly set up. Load it with paper and ensure there are ink or toner cartridges installed and ready for use.

2. Check Wi-Fi requirements: Ensure that you have a Wi-Fi network with an active internet connection. Your printer and the device you are using for setup (e.g., computer, smartphone, or tablet) should be connected to the same Wi-Fi network.

3. Find your network credentials: Locate your Wi-Fi network name (SSID) and Wi-Fi network password. This information is usually available on the back or bottom of your Wi-Fi router. If you can't find it, check your router's manual or contact your Internet Service Provider (ISP).

4. Access the printer's control panel: Depending on your printer model, it may have a touchscreen control panel or a simple LCD display with buttons. Access the control panel by turning on the printer and navigating through the menu using the arrow buttons (if applicable).

5. Access the Wireless Setup Wizard: Look for a wireless or network setup option in the printer's menu. Find and select the "Wireless Setup Wizard" or "Network Setup Wizard." This will initiate the setup process.

6. Select your Wi-Fi network: The printer will start scanning for available Wi-Fi networks. When it finds your network, select it from the list.

7. Enter your Wi-Fi password: If your Wi-Fi network is secured (which it should be), you'll be prompted to enter your Wi-Fi network password. Use the printer's on-screen keyboard to input the password accurately.

8. Connect to the network: After entering the password, the printer will attempt to connect to the Wi-Fi network. This process may take a moment. Once connected, you should see an indication on the control panel or display that the printer is now connected to Wi-Fi.

9. Print a test page: After successfully connecting to the Wi-Fi network, it's a good idea to print a test page to ensure everything is functioning correctly. This will also help you verify that the printer is working over the wireless connection. To know more about how to setup hp printer to wifi.

Conclusion: Please note that the above steps are general guidelines. The actual steps and wording on the printer's control panel might differ based on your printer's model. If you encounter any issues or get stuck during the setup process, you can refer to your printer's user manual or visit the official HP support website for specific instructions related to your printer model.