To connect your Canon printer to a Wi-Fi network, you'll need to follow these general steps. To know more about how to connect canon printer to wifi network. Keep in mind that the exact process may vary slightly depending on the model of your Canon printer. Refer to the user manual that came with your printer for specific instructions if needed.

1. Prepare for Setup: a. Make sure your Wi-Fi network is up and running, and you have the network name (SSID) and password handy. b. Ensure that your Canon printer is turned on and properly connected to a power source.

2. Access Printer Setup Mode: a. On your printer's control panel, locate the "Settings" or "Setup" button. Press it to access the printer's setup menu.

3. Navigate to Wi-Fi Setup: a. In the setup menu, find and select the "Wireless LAN" or "Wi-Fi" option.

4. Select the Wi-Fi Network: a. Your Canon printer will now search for available Wi-Fi networks. Once the list appears on the printer screen, select your Wi-Fi network from the list.

5. Enter Wi-Fi Network Password: a. If your Wi-Fi network is secured with a password (which is usually the case), you'll be prompted to enter the Wi-Fi password. Use the printer's control panel or on-screen keyboard to enter the password.

6. Confirm and Connect: a. After entering the password, double-check to make sure it is correct. Then, confirm the selection to initiate the connection process.

7. Wait for Connection: a. The printer will attempt to connect to the Wi-Fi network. This process may take a few moments. Once connected, you should see a confirmation message on the printer's screen.

8. Test the Connection: a. To ensure that the connection was successful, try printing a test page or a configuration page from the printer's control panel. If the test page prints without any issues, your Canon printer is now connected to the Wi-Fi network.