Canon is a well-known manufacturer of imaging technology. Canon makes a wide range of printer gear. You can use a Canon Pixma Mg3620 inkjet printer at home. You can share your Canon Pixma printer with other home appliances by wi-fi connecting it. Use the WPS method to setup the wifi on a Canon Printer Mg3620. There is a conventional connection that can be made to the printer, despite being slightly drawn out. You don't need to use the conventional approach if you can see the router's actual WPS pin. The Canon MG3620 may connect to wifi directly because of your WPS.

How can I connect my Canon MG3620 printer to wifi?

Check your router's characteristics to see if you can use WPS to connect your Canon Pixma Mg3620 to WiFi. It must offer a legitimate WPS pin and be WPA-secured. Making the printer a part of a secure network makes sure that only trustworthy users can use it. The Canon printer needs to be set up for Wi-Fi before configuring the network.

• Press the Wi-Fi button on the Canon device.
• On the Canon printer settings screen, select Device settings.
• Locate the Network choices using the arrow keys.
• Select Wireless LAN options when the LAN settings window opens.
• The printer's Wi-Fi lamp will flash as it scans the network.

Press the Stop button and then select Wireless LAN settings if the printer is unable to establish a network connection. When you click OK, the Wi-Fi network will become visible. If your printer is able to connect to the network, type the WPS passphrase and press OK. To finish the Canon Pixma MG3620 wifi setup, the proper password must be entered. No request for a password will be made while your network is accessible. A printer could connect to another open network. Examine the network when the Canon Pixma MG3620 connects via wifi. Print out the network configuration page to confirm the linked network. By repeatedly pressing the Cancel button on their Canon printer until it flashes 15 times, users can easily print that page. It is now necessary to examine the printout in order to ascertain the SSID and connection status. You can start installing the driver after verifying that all the information needed to connect the Canon MG3620 to wifi is accurate.

How to Install a Canon MG3620 Driver

Any device can be connected to the printer once a network connection has been established. However, a driver is necessary in order to connect to the printer. The printer is able to receive the print task because of the communication that this printer software has made. Visit the Canon website to configure. Locate the printer on the computer after the application has been installed. Send the print command after selecting the Canon printer name. Print the documents after loading them out.

Utilize the common printer attachment method.

Choose a conventional one if WPS isn't supported by your internet connection. For this procedure, purchase the Canon programme. Run the programme now, then set up the printer.

• On the welcome page for the Canon, select Next.
• Select "Wireless LAN connection" from the list of "connection technique."
• The user must now choose Access Point Suggested.
• The Canon programme is currently looking for the printers that were previously connected.
• Select Not Found.
• The Canon will now begin to be fitted.
• After choosing Cableless Setup, turn on the Wi-Fi icon.
• The installation tool will show up.
• Choose the appropriate location on the area wizard.
• Select your language and country. The following EULA wizard option for adding software asks you to confirm.
• The Canon project will begin.

The SSID screen will appear on the computer after connecting the printer. At this stage, run the printhead alignment command. Finally, click the Exit button to connect the printer.

References: Setup Canon Pixma Mg3620