A power Steering Pump Pulley is a pulley used to drive a power steering pump on a car or truck. Whether it's driven by a single V-belt or a serpentine belt, the power steering pulley is usually sized to allow the power steering pump to run above engine rpm. A typical Power Steering Pump Pulley requires a special tool to remove and replace the pulley on the pump. Since there is no adjustment mechanism on many power steering pumps, the solution to a squeaky steering pump belt is usually to spray a little oil on the belt. Most Power Steering Pump Pulley designs use solid steel stamping to construct the pulley. This is due to the speed and torque at which the pump is turning. Under such severe loads, the pulley can bend or break. Usually, only the power steering pump needs to be replaced or a leaking pump seal is replaced, and with the seal on the pulley shaft, it is impossible to service the pump seal without removing the power steering pulley.

Zhejiang Guanlun Machinery Co., Ltd. not only has Power Steering Pump Pulley but also V Groove Pulley and other products, welcome to check our official website.