Print quality issues can be frustrating, especially when your brother printer not printing black color properly fails to produce accurate black color output. Whether you're dealing with faded text, streaks, or inconsistent black printing, addressing the problem promptly is crucial. In this step-by-step guide, we'll walk you through a series of troubleshooting steps to resolve the issue of your Brother printer not printing black color properly.

Step 1: Check Ink Levels

Begin by checking the ink levels in your Brother printer. Insufficient ink can lead to faded or incomplete black prints. To check ink levels:

1. On your printer's control panel, navigate to the ink or cartridge settings.
2. Find the option to check ink levels and verify if the black cartridge has enough ink remaining.

Step 2: Clean the Print Head

Clogged or dirty print heads can cause uneven or faded black printing. Brother printers often have a built-in cleaning function:

1. Access your printer's settings or maintenance menu on the control panel.
2. Locate the print head cleaning option and initiate the cleaning process.
3. Follow the on-screen instructions to complete the cleaning cycle.

Step 3: Perform a Nozzle Check

A nozzle check pattern helps identify which nozzles are clogged. Follow these steps:

1. Access the printer's settings or maintenance menu.
2. Find the nozzle check or alignment option and print a test pattern.
3. Examine the pattern for any missing or faint lines in the black segment.

Step 4: Manual Cleaning

If the print head cleaning doesn't yield satisfactory results, consider performing a manual cleaning:

1. Turn off the printer and unplug it from the power source.
2. Open the printer's cover to access the print head.
3. Gently dab a lint-free cloth or cotton swab moistened with distilled water onto the print head. Avoid using excessive force.
4. Allow the print head to dry completely before closing the printer cover and turning it back on.

Step 5: Check for Driver and Software Updates

Outdated printer drivers and software can lead to printing inconsistencies. Make sure you have the latest drivers and software from Brother's official website:

1. Visit the Brother website and navigate to the support section.
2. Enter your printer model and download the latest driver and software updates.
3. Install the updates according to the provided instructions.

Step 6: Calibrate the Printer

Calibrating your Brother printer can help improve color accuracy and consistency:

1. Access the printer's settings or calibration menu on the control panel.
2. Follow the prompts to initiate the calibration process.
3. Once calibration is complete, print a test page to check if the black color issue has been resolved.

Step 7: Replace the Black Cartridge

If all else fails, it's possible that your black ink cartridge is faulty or empty. Replace the black cartridge with a new, genuine Brother cartridge:

1. Turn off the printer and open the cartridge access door.
2. Carefully remove the old black cartridge and replace it with the new one.
3. Close the cartridge access door and turn on the printer.
4. Print a test page to check if the black color prints properly now.

Conclusion

Dealing with a brother printer connected to wifi but not printing requires a systematic approach to troubleshooting. By following these step-by-step instructions, you can identify and address the root cause of the problem. Whether it's an issue with ink levels, clogged print heads, or outdated drivers, taking the appropriate actions can restore your printer's ability to produce accurate and consistent black color prints.